ASSEMBLING YOUR BLENDER
•
Do not plug in until you have
assembled your blender and
unplug straight after use
•
Prior to first use, wash lid, jug and
blade unit
•
Place the jug onto the power base
•
Push the lid onto the jug and at
the rear of the lid locate the
plunger into the Safety Interlock
•
The Dualit blender has a double
Safety Interlock that prevents the
motor running unless the lid and
blade is correctly in position
FILLER CAP / BLADE KEY
•
Remove cap and add ingredients
only at slow speeds. When using at
high speed, with a full jug or with
warm contents, stop blender and
then add ingredients
•
The filler cap doubles up as a key
for removing the blade assembly
from the Jug for cleaning
USING YOUR BLENDER
•
Plug power cord into earthed
socket. Blender is now ready for
use. Please Note: The Red
power light indicates that there is
power to the Blender. This light
changes to a Green light
when the blades are running
•
Place fully assembled jug onto
power base
•
Insert foodstuffs into the jug
•
Attach lid, ensuring the safety
plunger is in place. Keep hand on
rear of lid to ensure safety switch is
engaged
•
Switch unit on, the power light
will slowly flash red
•
Turn speed control knob to desired
setting
•
Press the start/stop button, the red
flashing light, will turn to solid
green and the blades will rotate
8
BLENDING
•
To turn off, press the start/stop
button again, the power light will
return to flashing red
•
To pour, using the handle, lift the
jug vertically upwards off the
blender base, remove the lid to
pour
•
The speed can be adjusted when
blending by turning the speed
knob in either direction
•
All speeds can be used with pulse
button. On the speed control knob
1 is slow 5 is fast
•
When blending warmed foods, do
not add 'hot' liquids to glass jug.
Always allow liquid to cool
below 60°c before adding to
the jug and place a gloved hand
over the lid and only operate on
slow speed
•
Do not insert frozen foods into jug
taken directly from a hot dish
washer