Stopping Play; Ejecting Disc - Sanyo DC-TS780 Instruction Manual

If a menu appears on the TV screen...
Press the 4, a, 5 or b button (or the number buttons)
to select the menu, then press the ENTER button.
Playback of the selected menu starts.
Note:
For more details, please refer to the jacket or case of the disc.

Stopping play

[DVD] [VCD]
- Press the n button once.
When you press the a (Play) button, play starts automatically from the
point where you stopped.
Note:
Some discs may not resume play.
- Press the n button twice. The unit stops completely.
When you press the a (Play) button, play starts from the beginning of
the disc.
[CD]
- Press the n button. The unit stops completely.

Ejecting disc

1. Stop the disc play completely.
2. Press the q button. "EJECT" appears briefly on the display and the
disc is automatically ejected.
CAUTION:
Never touch the disc while the disc being ejected. This will damage the
inside of the unit and the disc.
3. Remove the disc
Note:
After you press the q button to eject the disc, you must remove the disc
from the loading slot. If you do not remove the disc within approximately
2 minutes, the disc is automatically retracted into the loading slot.
Continuing play from where you stopped watching (Last memory
play) [DVD]
1. During play, press the L.MEMO button at the point from which you
want to resume play later. "STOP" appears on the display. Play stops
automatically.
2. Remove the disc or turn off the power.
3. Load the disc (and press the a (Play) button), or turn on the power.
"Last Memo Play?" screen appears.
4. Press the 4 button to select "Yes".
5. Press the ENTER button. Play resumes from the point where you
stopped.
Note:
- Point on up to 3 discs can be memorized.
- The Last Memory Play mode may not work correctly with some discs.
What is "PBC"?
"PBC" is an abbreviation for "Playback Control" that refers to control codes
prerecorded on Video CDs.
During playback of Video CD with PBC, "PBC" appears on the display.
Disc lock function
You can lock the disc to prevent misuse by young children.
1. Press and hold down the q button.
2. Load the disc while holding the q button down until "LOCKED"
appears on the display.
The q button will not function.
To release this function, press the q button until "UNLOCKED"
appears on the display.
(The memory is released.)
14