Table of Contents
Advertisement
Programmed play [VCD] [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press the PROGRAM/RANDOM button once (VCD) or twice (CD) in
the stop mode. The programme mode screen appears.
2. Press the number buttons to select the track number.
Example:
To select track No.3, press 0, then 3.
To select track No.24, press 2, then 4.
-
If you make a mistake, press the CLEAR button.
3. Press the 5 button to move the highlighted box down.
Example:
4. Repeat step 2 - 3 as above to select other tracks.
5. Press the a (Play) button to start play.
When all programmed selections have played, the unit stops
automatically.
-
The programme contents are retained in memory.
Note:
To play the programme again, press the PROGRAM/RANDOM button
once (VCD) or twice (CD) to call up the programme mode screen, then
press the a (Play) button.
To clear the programme one by one
In the programme mode, press the 4, a, 5 or b button to select the track
number. Then press the CLEAR button.
To clear all the programmes
In the programme mode, press the 4 button to select "All Clear". Then
press the ENTER button.
To change the programme
1. In the programme mode, press the 4, a, 5 or b button to select the
track number.
2. Press the number buttons to enter the track number to be replaced.
Press the PROGRAM/RANDOM button to quit the programme mode
screen.
Selecting subtitle language [DVD]
This operation works only with discs on which multiple subtitle languages
are recorded.
1. Press the S.T.ON/OFF button during play. The subtitle language mark
appears on the screen (Example:
press the button again.
2. Press the S.T.CH button repeatedly until the desired subtitle language
appears on the screen.
Example:
French
After few seconds, "
" disappears.
17
1/3 en). If "
Off" appears,
Note:
-
In some cases, the subtitle language is not changed to the selected
one.
-
When a disc supporting closed caption is played, the subtitle and the
closed caption may overlap each other on the TV screen. In this case,
turn the subtitle off.
-
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
-
When the power is turned on or the disc is replaced, select the subtitle
language again.
-
If the subtitle language is not necessary, press the S.T.ON/OFF
button to select "
Off".
Selecting audio soundtrack language [DVD]
This operation works only with discs on which multiple audio soundtrack
languages are recorded.
Hello!
Press the SHIFT + 5 AUDIO buttons repeatedly during play until the
desired language appears on the screen.
Example:
French
DTS sound
Note:
-
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
-
When the power is turned on or the disc is replaced, select the
language again.
-
If the language is not recorded on the disc, only the available language
on the disc will be heard.
Changing the audio channel output [VCD]
During VCD play, press the SHIFT + 5 AUDIO buttons to select an audio
channel.
Left Mono v
Right Mono v
Holà!
¡Hola!
Stereo v ...
Hide quick links:
Advertisement
Table of Contents
