Rear Panel - Sanyo DVR-HT120 Instruction Manual

Rear Panel

1
2
1 ANTENNA IN
2 ANTENNA OUT
3 COMPONENT VIDEO OUT
4 VIDEO OUT
5 AUDIO OUT
6 S-VIDEO OUT
7 DIGITAL AUDIO OUT
8 AV 2
9 AV 1(TO TV)
10 Mains lead
3 4 8
5 6 7
Aerial input: Socket into which aerial input is connected.
Aerial output: Socket from where aerial output is connected to TV set.
Video output: Socket from where YUV (Component Video) output is connected to YUV Video
compatible input devices (Progressive scan TV, etc).
Video output: Socket from where Video (Composite Video) output is connected to Video
compatible input devices.
Analogue audio output: Socket from where audio output is connected to audio input devices.
Video output: Socket from where S-Video output is connected to S-Video compatible input
devices.
Digital audio output: Socket into which digital audio input devices can be connected (ampli-
fi er/receiver).
SCART socket 2: Connect to external equipment.
SCART socket 1: Connect to the TV set.
Plug into the power source.
9 10
p.9
p.9
p.10
p.10
p.10, 12
p.13
p.11
p.11
p.9
p.14
4