Connecting The Mains Lead - Sanyo DVR-HT120 Instruction Manual

Connecting to the DVD Recorder
Before connecting, remove the protective cap
from the socket. Replace the cover when the
socket is not in use. Also, remove the protective
cap on the optical lead plug.
If your equipment has a coaxial digital audio output socket, use the COAXIAL DIGITAL AUDIO IN socket.
Auxiliary Equipment or TV Connection
If you want to enjoy an auxiliary equipment or TV sound, connect it as shown in figure.

Connecting the Mains Lead

After all connections have been made, connect one end of the mains lead to the AC IN socket and the other end to an AC outlet.
Note:
The system is not completely disconnected from the mains unless the primary power switch [ON/OFF] is set to OFF.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.
5
DVD recorder (DVR-S120)
Optical lead
Powered subwoofer (ASX-HT120W)
S-VIDEO VIDEO R-AUDIO-L
A/V
INPUT
S-VIDEO VIDEO R-AUDIO-L
A/V
OUTPUT
Audio lead (not supplied)
S-VIDEO VIDEO R-AUDIO-L
AUDIO
VIDEO
OUTPUT
Auxiliary equipment (VCR, etc.)
TV
Audio lead (not supplied)