ClearSounds Freedom Phone CSC1000 Quick Start Manual page 2

PARTS CHECKLIST
HANDSET &
PHONE BASE
HANDSET CORD
TELEPHONE LINE
AC ADAPTER
CORDS
(ONE 8 INCH &
(7.5v/500mA)
ONE 6 FOOT CORD)
WALL PLATE USER'S MANUAL
ADAPTER
PHOTO TEMPLATE
CONNECTING YOUR PHONE
1. CHECK PARTS LIST
2. PRE-SELECT AUXILIARY FEATURES:
a. AMPLIFICATION: Amplify Override ON / OFF
b. RINGER: Strobe & Shaker / Only Shaker / Only Strobe
3. PHONE INSTALLATION: The phone should be located in
an area where it is easy to see the visual display and lighted
ringer. Choose an area near a telephone wall jack (RJ11C)
and power outlet. The telephone may be placed on a shelf
or table or may be fixed to the wall using the wall plate
adapter (mounting bracket). Begin by removing the clear
plastic Caller ID protective tab.
Desk / Table Mounting
1. Plug the AC power adapter into the jack on the back
of the telephone. Wait until the phone is completely
setup before plugging the AC adapter into the electrical
outlet or surge protector.
2. Connect one end of the 6 ft telephone cord to the line
jack on the back of the phone and connect the other
end to a modular phone jack.
3. Connect one end of the coiled handset cord to the
handset and the other end to the phone base.
4. Lift the handset and listen for the dial tone.
Wall Mounting
1. Adjust he handset hanger tab so that the hook points
up. This will keep the handset from falling out of the
cradle when it is mounted on the wall.
2. Plug the AC power adapter into the jack on the back of
the telephone (complete setup before plugging the AC
adapter into the electrical outlet or surge protector).
3. Plug the 8-inch short phone cord into the telephone
jack on the phone.
4. Insert the wall plate adapter by lining it up with the
holes on the phone, then push the wall plate adapter
in towards the phone and slide the plate upwards until
it is securely seated on the phone.
5. With the wall plate adapter installed, plug the 8-inch
short phone cord into the jack on the wall.
6. Mount phone onto wall jack mounting screws (dry wall
mounting, see page 14.
7. Plug the AC power adapter into the electrical outlet.
8. Connect the handset using the coiled handset cord and
listen for a dial tone.
LOCATION OF CONTROLS
3 6
4
7
1 2
27
28
26 24 22 18
25 23 20
Figure 1
01. Hook Switch 16. Headset Key
02. Handset Hanger Tab 17. Message waiting /
03. Large LCD/Caller ID Screen New call LED
04. Left Soft Key 18. In Use LED Indicator
05. Right Soft Key 19. Visual Phone Ringer
06. Up/Down Scroll 20. Microphone
07. Handset Tone Control 21. Speakerphone Key
08. Handset Volume Control 22. Redial Key
09. Play/Stop Key 23. Amplify Activation Key
10. Next Key 24. Emergency Memory Key
11. Previous Key 25. Prog – Program Key
12. Delete Key 26. (8) 1-Touch Photo
13. MEMO Key Memory Dial Keys
14. Voice Mail Key 27. Lighted Keypad
15. Call Waiting Key 28. Speaker
If at any time you have questions about your
telephone after reading this manual, please
contact our ClearSounds ® Customer Service
Department at 1-800-965-9043.
5
8
9
10
11
12
13
14
15
16
21
17
19