Download Print this page

Fujitsu PRIMERGY CX420 S1 System Configurator And Order-Information Manual page 9

Hide thumbs Also See for PRIMERGY CX420 S1:

Advertisement

Start PRIMERGY CX272 S1
II
Section
Basic unit
CX272 S1 System unit consisting of:
* 2U half wide server node (tray & motherboard) for pluggin into CX420 chassis
* Basic units with:
- Server tray mechanics
- Motherboard
- 1x PCIe- x8 slots for PSAS CP200i
- 1x PCIe- x8 GEN3 low profile
- 1x PCIe- x8 GEN3 low profile (only for 10GbE D2755 and 10GbE-T card)
Systemboard D3306 with:
* Up to two Xeon 4C, 6C & 8C CPU`s (Socket-R)
with 2 serial QPI links ( Quick Path Interconnect ) and four memory channels per CPU
CPU has to be selected for an orderable basic unit,
* Chipset Intel® C600 Series
* number of PCI slots:
* 16 memory slots for max. 512GB RAM DDR3 available
- Memory is divided into 8 DIMMs per CPU ( 4 channels with 2 slots per channel )
Possible max. configurations are:
16x 16GB RDIMM (dual rank modules) = 256GB
16x 4GB UDIMM (dual rank modules) = 64GB
First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible by 8x memory units
- SDDC (Chipkill) is supported for memory modules,
* Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller Powerville on-board
* AST2300 (integrated Baseborad Management Controller) on-board server management controller with
dedicated 10/100 Service LAN-port and integrated graphics controller.
The Service LAN-port can be switched alternatively on standard Gbit LAN port
* Graphics Controller integrated in AST2300 (integrated Baseboard Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,
640x480x32bpp 85Hz
Interfaces at the rear:
* 1x RS-232-C (serial, 9 pins)
* 1x VGA (15 pins)
* 2x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup
* 2x LAN RJ45, 1x Service-LAN RJ45
Interfaces internal:
* 1x USB 2.0 for UFM modul (embeded ESXi)
* 6x SATA interface via Patsburg -A for 6 SATA HD`s Non-Raid or 4 SATA HD's Raid 0/1/10 (LSI SW Raid)
A
see above
Fujitsu Technology Solutions x86 PRIMERGY Serve
System configurator and order-information guide
PRIMERGY CX420 S1 / CX272 S1
Status 2013-12-30
9 of 21

Advertisement

loading

This manual is also suitable for:

Primergy cx272 s1