Before Using Scale - Weight Watchers WW67WC Instructions For Use Manual

Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
1. Set switch on the base of the scale to measure in pounds (lb) or kilograms (kg).
2. Set scale on floor. Surface must be level for accurate operation and safety.
Weight Measurement Only
To measure weight only:
1. Operate the scale on a secure flat floor.
2. Choose pounds (lb) or kilograms (kg) by switching
the convertible switch on rear of scale.
3. Tap the scale to turn it on.
4. Wait until all digits light for a few seconds and
"0.0" appears.
5. Step on the scale and stand still to measure
your weight.
6. Step off the scale and it will shut off automatically.
Personal Data Setting Mode
Setting the User Number
1. Tap the scale to turn it on. Wait until "0.0" appears, then
press the "SET" button. User number "P-01" will flash;
press "UP" or "DOWN" button to select another user
number. Press the SET button to confirm.
Setting the User height
2. Default height flashes. Press "UP" or "DOWN" button to
get the correct height. Pressing and holding either the "UP"
or the "DOWN" arrow will advance numbers quickly. Press
"SET" button to accept the height.
Setting the Age
3. "AGE" appears and default age will flash. Press "UP" or
"DOWN" button to select your age. Once the correct age
has been reached, press "SET" button to confirm.
Setting Gender
4. Default gender icon flashes. Press "UP" or "DOWN" to
choose between male and female gender. Press "set"
button to confirm.
Display and store data
Data storage is now complete. Scale will display stored data
(height, age, gender) and then turn off automatically. Scale is
now ready for body analysis measurements.

Before Using Scale