Bosch FLEXIDOME AN outdoor 5000 User Manual page 2

2 | FLEXIDOME AN outdoor 5000
to produce the most detailed image possible. The
superior wide dynamic range for all lighting conditions
reveals details previously unseen.
Day/Night mode
The day/night mode provides enhanced night viewing
by increasing the IR sensitivity. The IR filter can switch
from color to monochrome automatically by either
sensing the illumination level or via the alarm input.
The filter can be switched manually via the alarm
input, through the camera menu or via the Bilinx
coaxial control interface. An internal through-the-lens
IR detector enhances the monochrome mode stability,
as it prevents reverting to the color mode when IR
illumination is dominant. IR contrast is also measured
and used to handle reflected IR light in outdoor
scenes.
Ease of installation
The lens wizard helps focus the lens at the maximum
opening to ensure proper back-focus is maintained
throughout the 24-hour cycle. No special tools or
filters are required.
Six independent, pre-programmed operating modes
support typical applications, but are fully
programmable for individual situations. Switching
between modes is easy via Bilinx or the external alarm
input.
Several other features are available that make
installation easy:
• Video BNC and power connectors on flying leads.
• A built-in test pattern generator produces signals to
test and fault-find cables.
• A multi-language On-Screen Display (OSD).
• A high efficiency power supply improves maximum
operating temperature
Cable compensation is used to avoid the need for
amplifiers in long distance coaxial connections up to
1000 m (3000 ft). It can prevent the image quality
degradation caused by signal losses from long cable
lengths.
Bilinx technology
Bilinx is a bidirectional communication capability
embedded in the video signal of this camera. Installers
can check status, change camera settings and even
update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation
time, provides for more accurate set-up and
adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Ideal picture performance
There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:
• Smart BLC – automatically and dynamically
compensates for strong backlight
• Peak White Invert – reduces glare from highlight
areas
• Contrast and sharpness – enhance details in bright or
misty scenes
• SensUp – sensitivity is dramatically enhanced by a
factor of 10
• Default shutter – improves the motion performance in
auto exposure mode
• Dynamic noise reduction – dynamically reduces noise
in the picture
Privacy masking
Fifteen different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.
Video Motion Detection
The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal or an alarm message can be
transmitted via Bilinx.
Lens Options
With this dome camera, there is no compromise
between scene coverage and aesthetics of the camera.
The camera brings the widest choice of lens selection.
Choose lenses between 2.8 to 10.5 mm for wide
coverage, 9 to 22 mm VF lens for standard coverage,
or 18 to 50 mm for long-rang coverage.
Typical applications
• Entrance foyer/lobby with glass
• Warehouses and loading bays
• Prisons and correctional facilities
• Airport locations including:
– baggage handling
– fuel and equipment storage
• Stadium
Certifications and approvals
Electro Magnetic Compatibility
Emission EN 55022 class B, FCC part 15 class B,
EN61000-3-2, EN61000-3-3
EN50121-4
Immunity EN 50130-4, EN 50121-4
Vibration IEC 60068-2-6
Safety
EN60950-1, UL60950-1 (2 edition), CSA C22.2 No. 60950-1-07
ND
(2 edition)
ND
Region Certification
Europe CE
USA UL
FCC
Canada CSA