Assembly; Operations; Special Features - Bissell Symphony User Manual

Assembly

Your hard floor cleaner assembles quickly and
easily, no tools required.
to assemble the unit
insert the body into the foot until you hear
the locking tab click.

Operations

Special features

Easy touch Digital controls™
The fingertip power controls are located on the
front of the handle. settings include:
(hI) – high Steam Use for durable floors or on
sticky messes. To turn steam on, click once. Click
again to turn steam off. Can be used simultane-
ously with the vacuum function or separately as
a steam mop only.
(lo) – low Steam Use on delicate floors or for
light, everyday cleaning. To turn steam on, click
once. Click again to turn steam off. Can be used
simultaneously with the vacuum function or
separately as a steam mop only.
notE: you must select a steam setting first
and then hold down the hand trigger to
produce steam.
(Vac) – Vacuum On/off switch. Can be used
simultaneously with either steam function or
separately as a stick vacuum only.
notE: all settings can be used alone or either
steam setting can be used simultaneously with
the vacuum setting.
microfiber mop pads with microban®
antimicrobial product protection
Reusable microfiber mop pads are machine
washable and safe for virtually all hard floor sur-
faces. Your hard floor cleaner may have come
with two different pads. The white microfiber
pad is best for everyday use on delicate flooring
like sealed hardwoods and laminate. The gray
and white striped pad can be used for scrub-
bing heavily soiled floors and cleaning tougher
messes. The Microban® Antimicrobial Product
Protection fights odor causing bacteria for a
fresher and cleaner mop pad.
WaRnInG
Do not plug in your hard floor cleaner until
you are familiar with all instructions and
operating procedures.
WaRnInG
Appliance will not pick up crayons, marbles
and other large objects.
Tip
» Do not attempt to use your
hard floor cleaner on the
steam setting without water
in the tank. You may hear a
knocking sound indicating
there is no water.
WaRnInG
Be sure to turn off vacuum mode if you
encounter liquid on the floor
www.bissell.com
5