Bissell Symphony Troubleshooting Manual
Vac & steam
Hide thumbs
Also See for Symphony:
- User manual (12 pages) ,
- User manual (16 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
Symphony Vac & Steam
No Steam
DO NOT USE VINEGAR OR ANY OTHER SOLUTION OTHER THAN WATER OR BISSELL STEAM MOP
DEMINERALIZED SCENTED WATERS IN THE TANK.
1) Is the water tank empty? If so, fill the tank and attempt to steam.
2)
( about 30 seconds). Wait until the light goes solid and attempt to steam.
3) Make sure a steam setting is selected by pushing a steam level button.
BISSELL Confidential
Advertisement
Related Manuals for Bissell Symphony
Summary of Contents for Bissell Symphony
- Page 1 Symphony Vac & Steam No Steam DO NOT USE VINEGAR OR ANY OTHER SOLUTION OTHER THAN WATER OR BISSELL STEAM MOP DEMINERALIZED SCENTED WATERS IN THE TANK. 1) Is the water tank empty? If so, fill the tank and attempt to steam.
- Page 2 5) Make sure the water filter** is installed properly. ter. A filter is required for this machine, just not a water filter, it is optional. There should be no gap between the filter and the machine when it is installed properly. BISSELL Confidential...
- Page 3 It should then start steaming. Take the foot off the machine, remove the foot tray and also the pad and ream the steam tip on the foot as well as the foot tray with a paperclip to remove any obstructions. BISSELL Confidential...
- Page 4 ASC. If there is not one nearby, set up cut cord RA if the machine is still under warranty. Set up replacement per RA Dest. Guide. Be sure to note issue in detail. BISSELL Confidential...