Security - Foxconn H61AP Series User Manual

Security

Main
Security configuration
Administrator Password
User Password
Administator Password
HDD BootSector Write
System Mode state
Secure Boot state
Secure Boot
Secure Boot Mode
► Administrator Password
This item is used to install or change administrator password.
After you input administrator password, it then will ask you to
confirm the password.
► User Password
This item is used to install or change user password.
Only when there exists a Administrator password, then this setting can be activated.
► Security option
To protect the BIOS from being changed by the unauthorized users, there is a security option
provided for your choice. Only when there exists a Administrator password, then this setting
can be activated.
[setup]:A password will be required to enter the BIOS.(Only check password when enter
setup)
[Always]:A password will be required to enter both the system and BIOS. (Always check
password)
► HDD BootSector Write
This item is used to enable or disable protect HDD MBR from avoiding destroied by virus.
► Secure Boot
This item is used to enable or disable Secure Boot control. Secure Boot is possible only if
system runs in User Mode.
► Secure Boot Mode
This item is used to select Secure Boot Mode.
The detailed parameter submenus will appear when you select "Custom" Mode.
f-center Advanced Boot
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Power Health Security
Set Administrator
Password.The password
must be 1 to 20
Not Installed
characters long.
Not Installed
[Normal]
Setup
Disabled
[Enabled]
[Standard]
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
BIOS SETUP
Save&Exit
41