Health - Foxconn H61M-S User Manual

Health

Main F-Center
Case Open Warning
CPU Temperature
System Temperature
CPU Fan Speed
System Fan1 Speed
CPUVCore
VDDR
+12V SYS
+5V SYS
VBAT
CPU Warning Temperature
CPU Shutdown Temperature
CPU Smart Fan Control
System Smart Fan Control
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Temperature
These items show the current CPU temperature detected automatically by the system.
► System Temperature
These items show the current System temperature detected automatically by the system.
► CPU Fan1 Speed
This item shows the current CPU Fan1 speed detected automatically by the system.
► System Fan Speed
This item shows the current System Fan speed detected automatically by the system.
► CPU VCore/VDDR/+12V SYS/+5VSYS/VBAT
These items show the Current CPU VCore/VDDR/+12V SYS/+5VSYS/VBAT voltage detected
automatically by the system.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Default value is [Disabled].
► System Smart Fan Control
This option is used to enable or disable systrm smart fan function. Default value is [Disabled].
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced Boot Power Health
Health
[Disabled]
: +98 C
: +34 C
: 3026 RPM
: N/A
: +0.924 V
: +1.608 V
: +12.022 V
: +5.039 V
: +3.144 V
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Security Exit
Enabled Case Open Warning and
open chassis,Intrusion Alarm
will appear. If don't enter
bios setup and disabled Case
Open Warning one time, Instru-
sion Alarm don't clear,it will
appear all the time.
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
39