Foxconn A88GM Deluxe User Manual page 22

TPM Connector : TPM
The TPM (Trusted Platform Module) provides the ability to the
PC to run applications more secure and to make transactions
and communication more trustworthy. To utilize this function,
you should purchase additional device and install it.
front Panel Connector : fP1
This motherboard includes one connector for connecting the
front panel switch and LED Indicators.
Hard Disk leD Connector (HDD-leD)
Connect to the chassis front panel IDE indicator LED. It
indicates the active status of the hard disks. This 2-pin
connector is directional with +/- sign.
Reset Switch (ReSeT-SW)
Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the switch
is pressed.
Power leD Connector (PWR-leD)
Connect to the power LED indicator on the front panel of
the chassis. The Power LED indicates the system's status.
When the system is in operation (S0 status), the LED is
on. When the system gets into sleep mode (S1) , the LED
is blinking; When the system is in S3/S4 sleep state or
power off mode (S5), the LED is off. This 2-pin connector
is directional with +/- sign.
Power Switch Connector (PWR-SW)
Connect to the power button on the front panel of the chas-
sis. Push this switch allows the system to be turned on and
off rather than using the power supply button.
Serial ATA Connectors : SATA1_2, SATA3_4, SATA5
The Serial ATA connector is used to connect with SATA Hard
Disk or CD devices which support this feature. For A88GM, Serial
ATA II interface allows up to 300MB/s data transfer rate.
For A88GM Deluxe, Serial ATA III interface allows up to 600MB/s
data transfer rate. Serial ATA III is backward compatible with
Serial ATA II.
HDD-LED
RESET-SW
SATA1_2/SATA3_4/SATA5
15
1 2
LCLK GND
LFRAMEn EMPTY
LRESETn NC_3
LAD3 LAD2
VDD LAD1
LAD0 GND
NC_1 NC_4
NC_2 SERIRQ
GND CLKRUNin
LPCPDn NC_5
19 20
TPM
1 2
+ +
PWR-LED
-
-
PWR-SW
EMPTY
NC
9 10
FP1
1
GND
TX+
TX-
GND
RX-
RX+
GND