Foxconn A76ML-K 3.0 User Manual page 37

Speed Adjust" item. If SPD value is faster than "Memory Speed Adjust" value, it will run at the
specified "Memory Speed Adjust" speed. Otherwise, SPD value is selected.
Select [Manual], then DRAM speed is manually selected according to the set value of "Memory
Speed Adjust".
► Memory Speed Adjust
This item will appear only when the "Memory Speed Mode" is set to [Limit] or [Manual].
The available settings are: [800MHz], [1067MHz], [1333MHz], [1600MHz], [Auto].
► Current DRAM Speed
This item displays the current DRAM speed.
► GFX Engine Clock Override
This item allows you to enable/disable GFX Engine Clock Override support.
► PCI Express Clock Override
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But
you had better disable it.Voltage Options
Voltage Options
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
CPU Voltage Control
Memory Voltage Control
► CPU Voltage Control
This option is used to change the CPU voltage in a step of 25mV. The voltage can be incre-
mented from +25mV to +775mV.
► Memory Voltage Control
This option is used to change the DRAM voltage in a step of 100mV. The voltage can be incre-
mented from +100mV to +300mV.
Voltage Options
[Disabled]
[Disabled]
Move Enter:Select +/-/:Value
F1:General Help
30
if overclocking is activated,
Help Item
Options
Disabled
+25mV
+50mV
+75mV
+100mV
+125mV
+150mV
+175mV
+200mV
+225mV
+250mV
+275mV
+300mV
+325mV
+350mV
F10:Save ESC:Exit
F9:Optimized Defaults