GE Feb-50 Installation Instructions Manual page 5

4 incoming lines with
3 wall jack
4 incoming lines with
4 wall jacks
u
LINE 1-2
RJ14 JACK
LINE 1
RJ1l JACK
u
m
o w
m
LINE 3
RJ1l JACK
a
m
o *
o
LINE 2
RJ1l JACK
LINE 4
RJ1l JACK
LINE 3 LINE 4
RJ1l JACK RJ1l JACK
Label the jacks at each location.
Identifying and Iabelling each jack at each location is also critical. To do
so, simply take a felt tip pen and write the information on the jack plate.
For example:
If you have difficulty in identifying
wall jacks.
Call the vendor who installed the inside wiring and ask for assistance in
identifying your existing wiring system and jacks.
If you are installing new wiring and jacks.
If the telephone wiring and modular jacks need to be installed, install
two-line RJ14 jacks at each telephone location. Each RJ14 jack accom-
modates two telephone lines. If 3 or 4 lines are to be used, MO
m
modular jacks will be needed for each telephone.