Table of Contents
Advertisement
5.
System Verification
Problem? Check the following
for a solution
before calling our toll free
"HELP"
number at 800-448-0329
The following
procedure
should be used to test system configuration
and
identify possible system connection
errors. The phone must be con-
nected to the AC power supply, lines 1 and 2 must be connected
to the
line 1, 2 jack, and the phone must have been programmed
with an inter-
com station address.
1.
2,
3.
Press the line 1 button. The line 1 LED and speakerphone
LED
should turn green and dial tone should be heard from the speaker,
Dial the number for line 2. A three beep call pending
tone should be
heard and the LED for line 2 should rapidly flash red with the ring
signal. If the LED for line 2 does not flash then line 2 is improperly
connected
to the phone.
If your configuration
utilizes line 3 and/or line 4, repeat steps 1 and 2
substituting
the respective
phone number(s)
in step 2.
Hide quick links:
Advertisement
Table of Contents
