GE Feb-50 Installation Instructions Manual page 10

4
Install Wall Mounted Telephones (optional)
/~~O~~A~Z
Telephone line cords must be con-
netted (St eps E through L) before AC power con-
O
.50
nection is made (Step M). Please follow these steps
E
'n
5 '7
optional)
in their proper sequence.
n
o
m
The GE 2-9450 telephone can be wall mounted to
an existing wall phone jack.
A. Remove the clear ACRYL/C COVER that covers
the MEMORY /NDEX. Carefullv remove the
MEMORY INDEX CARD
REFERENCE GUIDE.
and the QUICK
B. NOTE: THIS STEP IS ESSENTIAL.
You must install a 9V Alkaline Battery. It provides
back-up power to preserve numbers in memory
and any other stored information in the event of
any interruption of AC power to the telephone.
More importantly it allows use of the phone
during power outages.
Unscrew the BATTERY COVER. Pull the battery
removal ribbon so that it extends out of the top of
the battery compartment. Insert a 9V Alkaline
Battery (Not Provided) and replace the BA~ERY
COVER.
C. In pencil, write in all the users' names you've
listed on the worksheet under the appropriate sta-
tion numbers on the MEMORY /NDEX CARD.
Replace the QUICK REFERENCE GUIDE,
MEMORY INDEX CARD and the ACRYLIC
COVER.