Asus A88X PRO User Manual page 98

Fast Boot [Enabled]
Enable or disable boot with initialization of a minimal set of devices to launch active boot
option. Configuration options: [Disabled] [Enabled]
The following three items appear only when you set Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices]
[Hard Drive Only]
[Boot Drive Only]
USB Support [Partial Initial]
[Disabled]
[Full Initial]
[Partial Initial]
PS2 Keyboard and Mouse Support [Enabled]
[Auto]
[Full Initial]
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
3-26
All devices connected to SATA ports will be available during POST.
This process will extend the POST time.
Only hard drives connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
Only boot drive connected to SATA ports will be detected during POST.
Any hardware change will disable fast boot.
All USB devices will not be available until OS bootup for a fastest POST
time.
All USB devices will be available during POST. This process will extend the
POST time.
For a faster POST time, only the USB ports with keyboard and mouse
connections will be detected.
For a faster BIOS POST time, PS/2 devices will only be available when
the system boots up. PS/2 devices will not be available and BIOS Setup
program will not be accessible via PS/2 devices when the system is
restarted.
For full system control, PS/2 devices will be available during POST at any
circumstances. This process will extend the POST time.
All PS/2 devices will not be available until OS bootup for a fastest POST
time.
The BIOS skips over the Network Stack Driver and tries to boot from the
next device.
Allows the BIOS to boot from the Network Stack Driver.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Chapter 3: BIOS setup