Table of Contents
Advertisement
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
• For BIOS Updater version 1.30 or later, the utility automatically exits to the DOS prompt
after updating BIOS.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.10 Exit
menu for details.
• Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
3-38
Chapter 3: BIOS setup
- Quick Links:
- Motherboard Layout
- System Memory
- Onboard Leds
Hide quick links:
Advertisement
Table of Contents
