Mercedes-Benz 320 SE Operator's Manual page 114

Bulb for High Beam
HI (55 W)
Open hood.
Depress latch (4) and remove
cover (3).
Pull off electrical connector (10).
Unhook clamping ring and remove
bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall bottom end of cover (3) and
push against top end of cover until
properly seated.
Check lamp for proper operation.
Bulb for Low Beam (Xenon)
Warning!
Because of high voltage in Xenon
lamps, it is dangerous to replace the
bulb or repair the lamp and its
components. We recommend that
you have such work done by a
qualified technician.
Bulb for Fog Lamp H1 (55 W)
Open hood.
Depress latch (2) and remove
cover (1).
Pull off electrical connector (9).
Unhook clamping ring and remove
bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall bottom end of cover (1) and
push against top end of cover until
properly seated.
Check lamp for proper operation.
114