Table of Contents
Advertisement
Network Setup (Auto)
Use the Automatic Network Setup while your connecting the
TV to a network that supports DHCP. To set up your TV's
cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
Settings
Language
Menu Settings
Time Setup
Caption
Network
Demo Mode
Version Info
Reset Default
Enter
OK
3. On the Network screen, select Configuration and press
[ENTER] button to enter the submenu.
Settings
Internet Connection
Interface
Wireless Setting
Information
IP Setting
Connection Test
4. Set Internet Connection to On and Interface to Ethernet.
5. Select IP Setting and press [ENTER] button to enter it.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
6. Set Address Type to Auto.
7. Auto acquires and enters the necessary connection
values automatically.
8. If the connection values are not automatically entered,
please check your modem and router manuals for
Advanced Features
English
Initiate network
connection
Select
Exit
On
Ethernet
Select connection type
Select
Back
Auto
176.
16.
0.
0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0.
0.
0.
0
Select
Back
directions to enable automatic IP addressing by DHCP.
Or, follow the steps listed to the follow to manually
configure the network connection.
Network Setup (Manual)
Use the Automatic Network Setup when connecting your TV
to a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The network
connection values are displayed.
How to set up manually
To set up your TV's network connection manually, follow
these steps:
1. Follow Steps 1 through 5 in the "How to set up
automatically" procedure.
2. Set Address Type to Manual.
Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
3. Press [▲/▼] button to select IP Address and press [◄/►]
button to move the cursor to the entry field. Then press
0~9 buttons to enter the numbers.
4. Press [MENU] button to exit IP Address and press [▲/▼]
button to select the next options to enter the numbers.
5 When done, press [MENU] button to return to the
previous menu.
6. Select Connection Test to check the internet connectivity.
21
Manual
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
Select
Back
Hide quick links:
Advertisement
Table of Contents
