Motorola CPEo 450 Series User Manual page 12

Configuration
Step 2 - Device Time
Step 3 - WiMAX Security
Step 4 – Account
68P09306A78-A
FEB 2010
•
Re-type your new password in the Confirm New Login Password box.
•
Click Next.
If you forget your password, you can reset it back to the default (motorola)
password.
To reset the password, press and hold the reset button on the back of your CPE for
5 or more seconds. Before resetting the CPE, ensure that the power is ON.
This screen allows you to set the time zone and to enable Daylight Savings Time
(when applicable) for your location.
•
Select the appropriate time zone for your location from the drop-down box.
•
Check the box that is called "Auto Adjust for Daylight Savings Time" if you live in
a region that observes Daylight Savings Time. This box is checked by default.
•
Click the Next button.
The WiMAX Security tab contains your authentication method. Check with your
service provider to determine if they require a user name and password for
authentication purposes.
•
If the Authentication Method is EAP-TLS, no User Name and Password are
required. Enter the Realm information supplied by your service provider. Click
the Next button.
•
If the Authentication Method is EAP-TTLS/MS-CHAPv2, enter a User Name and
Password, and Realm information supplied by your Service Provider. Once you
have entered the User Name/Password/Realm information, click the Next button.
•
If you are unsure of the Authentication Method, select EAP-TLS (which is the
default) and click the Next button.
The Account tab allows you to manage Voice over IP (VoIP) related services. Please
consult with your telephony service provider for these settings.
Click the Apply button when finished.
Congratulations! You have now completed the setup of your WiMAX connection.
Click OK on the Congratulations! dialog box.
A status screen appears that shows Network status and telephony status. The
Network Status screen provides any status associated with your WiMAX Wireless
Broadband connection. The Telephony Status screen provides status of your
telephony service.
•
The Restart button is used to restart the device. The restart button is available
on every screen.
3
3-3