Configuration And Setup Tool - Niles SI-1650 Installation Manual

16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS

CONFIGURATION AND SETUP TOOL

Open the Configuration and Setup Tool Using a Web Browser. Once a direct
Ethernet or local area network connection is made, use the web browser included
with your laptop, PC, iPad, tablet or smartphone to log into the web server in the
SI-1650. Enter the current IP address of the SI-1650 into the URL line of your web
browser.
The factory default IP address of the SI-1650 is http://192.168.1.1
Note: This may be the same for another product on your network. Make sure there are no conflicts.
The Network Settings main selection is displayed when the web interface is first
opened.
NETWORK SETTINGS MAIN SELECTION
Choose the Network Settings main selection and the Network Settings page is
displayed. The current IP address and subnet mask of the SI-1650 are displayed.
Both the IP address and the subnet mask can be changed and saved to the
amplifier's memory by selecting the save option.
Note: Changing the IP address is only recommended when connecting to a local
area network. A recessed reset button located on the back of the SI-1650 restores
the IP address, network settings and amplifier configuration back to factory
default.
FIGURE 8
19
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992