S Tation; Installing The Phone; Installing The Handset Battery; Base Station - GE 28300 User Manual

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before using the
cordless handset(s).
CAUTION: To reduce the risk of fire or personal injury,
use only the Thomson Inc. approved model GP80AAAHC - NiMH
1.2V 800mAh rechargeable Nickel-metal Hydride battery, which
is compatible with this unit.
1. Locate batteries and battery door which are packaged together inside a plastic
bag and are separate from the handset.
. Locate the battery compartment on the back of the handset.
3. Insert the batteries.
4. Close the battery compartment by pushing the door up until it snaps into place.

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface near your personal computer.
System Requirements:
Recommended:
PC running Windows 000 or XP
1 GHz processor
56 MB RAM
30 MB free space on your hard drive
Cable, DSL or equivalent broadband
connection to Internet
Standard landline (RJ-11)
10
Minimum:
PC running Windows 000 or XP
400 MHz processor
18 MB RAM
10M free disk space on your hard drive
Internet Connection (either dial-up:
minimum 33.6 Kbps modem,
or any broadband: cable, DSL, etc.)