Back Terminals; Loading Remote Controller Batteries - Casio XJ-A141 User Manual

Back Terminals

COMPUTER terminal
AV terminal
Remote control signal receiver
HDMI port
(XJ-A146/XJ-A246/XJ-A256 only)
* This serial port is for connecting a separately available special cable (YK-5) to control the projector
from a computer.

Loading Remote Controller Batteries

Important!
Be sure to use alkaline batteries only.
*
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Caution
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1.
Open the battery cover on the back
of the remote controller.
3.
Close the battery cover on the back of the remote controller.
Replacing Remote Controller Batteries
Open the battery cover on the back of the remote controller, replace the old batteries with new ones,
and then close the battery cover.
USB port
*
Serial port
Anti-theft lock hole
2.
Load two new batteries into the
case, making sure that their positive
(+) and negative (–) ends are facing
correctly.
9
Speaker
Intake vents
Power connector