Casio XJ-A141 User Manual page 45

Indicator/Error Message
POWER : Amber flashing
Amber steady
LIGHT : –
TEMP : –
Message : Internal temperature is too
high. The projector will
turn off.
POWER : Amber flashing
Red steady
LIGHT : –
TEMP : Red flashing
(0.5-second interval)
Message : –
POWER : Green steady
LIGHT : –
TEMP : –
Message : The projector has a
history of turning off due
to high temperature.
Check air vents for
blockage.
POWER : Amber flashing
Red steady
LIGHT : Red steady
TEMP : Red steady
Message : There is a problem with
the fan. The projector will
turn off.
POWER : Amber flashing
Red steady
LIGHT : –
TEMP : Red steady
Message : A system problem has
occurred. The projector
will turn off.
Description and Required Action
Power has turned off automatically due to internal overheating. Perform
the following steps.
1 Check for any blocking of the projector's intake vents and exhaust
vents, and make sure that there is sufficient space around the
"
projector. See Setup Precautions" (page 10).
2 If there is dust accumulated around the intake vents and/or exhaust
"
vents, remove it. See
If there is no problem with the projector's vents, confirm that the POWER/
STANDBY indicator is lit amber (without flashing), and then turn power
back on again. If the error occurs again when you turn power back on,
contact your retailer or nearest authorized CASIO Service Center.
Power has turned off automatically due to internal overheating. This
causes a dialog box containing the text in the next item below to appear
the next time you turn on the projector. Follow the steps that are
provided.
The last time you were using the projector, power turned off automatically
due to internal overheating. Press the [ESC] key to clear the warning
message and perform the following steps.
1 Check for any blocking of the projector's intake vents and exhaust
vents, and make sure that there is sufficient space around the
"
projector. See Setup Precautions" (page 10).
2 If there is dust accumulated around the intake vents and/or exhaust
vents, turn off the projector and remove it. See
Projector" (page 43).
3 Disconnect the power cord from the projector and wait for all of the
projector's indicators to go out. Next, reconnect the power cord and
turn the projector back on. If the error occurs again when you turn
power back on, contact your retailer or nearest authorized CASIO
Service Center.
Power has turned off automatically due to a fan problem. Confirm that the
POWER/STANDBY indicator is lit red (without flashing) and that the fan
has stopped. After checking the POWER/STANDBY indicator, disconnect
the power cord from the projector and wait for all of the projector's
indicators to go out. Next, reconnect the power cord and turn projector
power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Power has turned off automatically due to a system problem. After
confirming that the POWER/STANDBY indicator is lit red (without
flashing), disconnect the power cord from the projector and wait for all of
the projector's indicators to go out. Next, reconnect the power cord and
turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
45
Cleaning the Projector" (page 43).
"
Cleaning the