Replacing The Light Bulbs - GE 24 Owner's Manual

Profile models 24 & 27 with refreshment center and electronic dispenser
Table of Contents

Advertisement

Available languages

Available languages

Replacing the light bulbs.

Turning the control to the OFF position does not remove power to the
light circuit.
Fresh Food Compartment–Two Lower Lights
26
Fresh Food Compartment–Upper Light
Unplug refrigerator.
1
Pull off the temperature control knobs.
2
Pull bottom of the light shield down and forward,
3
then rotate the top up and off.
After replacing with an appliance bulb of the same or lower
wattage, reinstall the light shield and plug the refrigerator back in.
These lights are located behind the top drawer.
Unplug the refrigerator and remove the top drawer and cover.
1
Grasp the bottom edge of the shield and pull forward and up to
2
free its bottom edge.
After replacing with an appliance bulb of the same or lower wattage, replace the
shield, drawer and cover and plug the refrigerator back in.
(on some models)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

27

Table of Contents