GE 24 Owner's Manual page 13

DISPLAY
DISPLAY
DISPLAY
DISPLAY
This flashing code tells you to check your frozen food.
Has any of it started to thaw? A package may be holding
the freezer compartment door open. Don't open the
door more often than absolutely necessary while this
code is displayed. Touching the SYSTEM CHECK-RESET
pad after the freezer compartment temperature has
returned to normal will erase the code.
This flashing code tells you the power to the refrigerator
has been interrupted for more than two seconds. Check
the condition of food in both the fresh food and freezer
compartments. Touch the SYSTEM CHECK-RESET pad
to erase the code.
There is no fault with the refrigerator when the PF code
flashes.
This flashing code tells you to check the automatic
icemaker. Ice clumps in the storage bin may have stalled
the icemaker. Follow corrective measures described in
Troubleshooting Tips. If water supply to the icemaker is not
connected or not turned on, make sure the icemaker
feeler arm is in the STOP (up) position. Code stops
flashing when problem is corrected or SYSTEM CHECK-
RESET pad is touched.
This flashing code tells you something is wrong with the
defrost system—keep doors closed to retain cold and call
for service. Code flashes until problem is corrected.
13