Setting Colour Temperature And Colours; Setting Functions - Fujitsu P27T-6 IPS Operating Manual

Operation

Setting colour temperature and colours

Setting functions

Input select
Language
DDC-CI
OSDTimeout
Factory recall
26
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, AdobeRGB, Native and Custom Colour.
The options sRGB, AdobeRGB, Native and Custom colour are only available in
Office mode setting.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
The 6500K and sRGB settings are recommended for general Windows
applications.
The AdobeRGB setting is for applications in the enhanced AdobeRGB colour
space.
The full colour space of the LCD panel can be used in the Native and Custom
Colour settings.
Call up the Setup settings window
Select the input signal
This function is used to select the input signal (VGA, DVI, DP, HDMI1 or
HDMI2).
This is on condition that the display adapter supports this function.
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
cable, an Auto Processing message is displayed. The language selection
menu appears.
button. If you are using a VGA data
Fujitsu Technology Solutions