Starting And Stopping Rhythm Play; Using Synchro Start - Casio LD-50 User Manual

Starting and Stopping Rhythm Play

Perform the following steps to start and stop rhythm play.
To start and stop rhythm play
1.
Select the rhythm you want to play (page E-15).
2.
Press the START/STOP button to start rhythm play.
Mode when you pressed START/STOP
Rhythm number
3.
To stop rhythm play, press the START/STOP button.
• The following shows the default settings during rhythm play.
LIGHTING GUIDE SYSTEM Mode

Using Synchro Start

With synchro start, you can put your Digital Drum into standby state from which rhythm play starts
automatically whenever you strike any of the drum pads.
To start rhythm play using synchro start
1.
Press the SYNCHRO START button.
Mode when you pressed SYNCHRO START
• Your Digital Drum automatically exits synchro start standby if you press any button or if you do not perform
any operation for about 30 seconds.
• You can rotate the dial and change the setting of the currently display screen (RHYTHM VOL. in this
example), if you want.
E-16
Page 16
Note icon
Item
Drum Set
Play Level
Flashes to indicate standby.
Flashing dial icon
Rhythm name
Default Setting
A0 : Auto
F2 : Dual Light
L0 : Off
Flashing dial icon
02.10.28, 11:19
272A-E-018A