Download Print this page

Honeywell 40014 User Manual page 2

Ceiling fan and light wall control

Advertisement

AC POWER
(BLACK)
RECEIVER LIVE
AC POWER
(BLACK)
(BLACK) L
LIGHT
(BLUE)
MOTOR
(BLACK)
MOTOR
(WHITE)
                                     
TO CEILING FAN
    
WALL CONTROL OPERATION (FIG.4)
 
High / Medium / Low Speed – Tap lightly to turn the fan on at high, medium or low 
speed respectively. 
 
Fan Off – Tap lightly to the fan off. 
 
Light –Tap lightly to turn light on or off. 
 
NOTE: Compatible for use with compact fluorescent bulbs. 
 
Walk Away Light Delay – Tap once ‐ the light and fan turn off after 1 minute. Light  
on the fan blinks once to confirm function is active. Press any button to cancel function. 
 
Home Shield – Press and hold the Light and Delay buttons for 3 seconds. Light on the  
fan blinks two times to confirm function is active. Fan will be off and the light will 
randomly turn on and off while you are away. To deactivate press any button once. 
 
 
WALL CONTROL INSTALLATION INSTRUCTIONS
1. Remove wall plate, disconnect and remove the toggle switch from wall outlet box.  
2. Make the electrical connections to the wall control (transmitter) unit as shown in Fig3. 
3. Carefully push all connected wires inside wall outlet box. 
4. Secure wall control unit with 2 screws (not included) previously removed from the 
existing wall outlet box. 
5. Slide the Power On/Off switch on wall control to "ON" position. 
 
NOTE: Before installing wall control, slide the switch to "OFF" position. 
 
TROUBLE SHOOTING
Review receiver wiring – is it wired correctly and receiving power? 
Is the fan speed control on HI and light switch in the ON position? 
Is the power on/off switch on wall control in the ON position? 
Learning process between fan and transmitter may not have been successful – see 
step 2 under activating the learning process 
Won't operate at a distance – make sure antenna wire is visible and not obstructed 
 
 
WARRANTY
This product is warranted to be free from defects in material and workmanship, under normal use and
maintenance, for a period of (1) year from the date of purchase. This warranty shall not cover any
removal or reinstallation costs, and shall not apply to: (i) cosmetic damage, such as scratches, nicks
WALL CONTROL
GROUND / EARTH
AC
INPUT
AC POWER
(WHITE) N
RECEIVER
 
FIG 3 
WIRING DIAGRAM 
Available at www.HoneywellStore.com
and dents; (ii) any alteration or improper repair, maintenance, handling, or
installation; (iii) the combination of the product with other systems or
components; (iv) consumable parts, such as batteries, including any
deterioration or damage to the product caused by the use of faulty batteries;
(v) damage caused by accident, abuse, misuse, water, flood, fire, or other
acts of nature or external causes; (vi) damage caused by service performed
by anyone who is not an authorized service provider; or (vii) damage to a
product that has been modified or altered. Your sole and exclusive remedy
for a breach
of warranty shall be replacement of the product. Alternatively, you may
return your product to the
retailer from which you made your purchase in accordance with applicable
return policies.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE
EXCLUSIVE AND IN LIEU OF
EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY
ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS
WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.
IN NO EVENT SHALL
ANY PARTY BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE
USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM
DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
)
To obtain warranty service, please call the customer service number below.
One of our customer
service representatives will assist you in determining whether you have a
warranty claim and, if so,
how to return your product. If you return your product for a warranty claim,
please securely pack
your product and include a copy of the original sales receipt, which is
required as the proof of
purchase for all warranty claims. You shall be responsible for shipment and
assume all costs and
risks associated with any product return
Walk Away Light Delay
The Honeywell Trademark is used under license from Honeywell 
International Inc. Honeywell International Inc. makes no representations 
or warranties with respect to this product.       
This product is manufactured for: 
Hong Kong China Electric Appliance Manufacture Co., Ltd. 
)
3059 Forest Hill Irene Rd, Ste 103 
Germantown, TN 38138        
1‐877‐580‐4359
Light
Home Shield
G
                                                 
G
WALL CONTROL OPERATION 
        
 
ALL OTHER WARRANTIES WHETHER
.
High Speed
H
Medium Speed
M
Low Speed
L
Fan Off
O FF
Power On/Off
O FF
O N
FIG 4 

Advertisement

loading

This manual is also suitable for:

374121