Radio Thermostat CT101 Operation Manual page 17

16
PG
Z-Wave and C-Wire Power
When your thermostat is running on C-Wire power, the Z-Wave radio will stay on and actively help
in routing messages within the z-wave network. The node type is fixed during network inclusion.
If C-Wire is present and powered during network inclusion, the thermostat will remain an always
listening node until the thermostat is removed from the network via network exclusion.
Caution
HVAC Setup and Z-Wave
Do not change the HVAC setup or HVAC selection switches if the thermostat is included to Z-Wave
network. The HVAC system must be changed, first REMOVE the thermostat from the network,
change the HVAC setup, and INCLUDE the thermostat to the network.