Pitch Bend Buttons - M-Audio Keystation Mini 32 User Manual

If you have made an error while entering the numerical data value, you can press the "CANCEL" key (C, first white key
on the left) to exit Edit Mode without making any changes.
As an alternative to steps 3 through 5, you can use the "+" and "-" buttons to change the value.
Press the "ENTER." key (G, last white key on the right.
6
Press the "Mod" button to hear change in the effect rate.
7
The Mod Rate value is retained when the keyboard is turned off.
To return the Modulation Rate to the default settings:
Press the Edit button. The Edit button light will illuminate to full brightness.
1
Press the "MOD RATE" key (F, 4th white key from the left).
2
Press the "DEFAULT" key (C, 8th white key from the left). The Edit light will dim to half brightness indi-
3
cating that programming is complete.

Pitch Bend Buttons

The Pitch Bend buttons are also assignable to any of the 131 parameters listed in Appendix D, "Standard MIDI
CC Numbers" on page 30.
To assign the Pitch Bend buttons to a parameter:
Press the Edit. The Edit button light will illuminate to full brightness.
1
Press the "PB ASSIGN" key (D#, 2nd black key from the right).
2
Use the Numerical Data Entry keys (0 -9) to enter the number of the effect.
3
If you make an error while entering the number, press the "CANCEL" key to exit Edit Mode without making any changes.
As an alternative to steps 3 through 5, you can use the "+" and "-" buttons to change the value.
Press the "ENTER" key (G, last white key on the right), the Edit light will dim to half brightness indicating
4
that programming is complete.
Press the Pitch Bend ">" button to increase the value of the effect.
5
The Pitch Bend buttons assignment are retained when the keyboard is turned off.
Keystation Mini 32 User Guide
17
Chapter 4: Edit Mode