Setting The Clock; Programming - Honeywell T8700B Product Data

SETTING THE CLOCK

1. To set the current time:
a. Press the key
once. You will see a
flashing clock.
b. Use the or
c. Press the key until End is displayed.

PROGRAMMING

The thermostat is preprogrammed for your convenience with
the following time and temperature settings, see Table 3.
Table 3. Preprogrammed Time/Temperature Settings.
Period Start Time
WAKE 6:00 AM
SLEEP 10:00 PM
a
T8700C only.
WAKE is the time period when you want the house at a
comfortable temperature during the day.
SLEEP is the time period you can set for an energy-saving
temperature while you sleep.
NOTE: The heating and cooling program times are the
same. Changing your cooling WAKE time also
changes your heating WAKE time.
The following is a heating program example. The System
switch is in the HEAT position. To change to the cooling
program (T8700C), move the System switch to the COOL
position and enter the cooling temperature settings.
IMPORTANT
When programming the T8700B, first move the
System switch to the heat position.
To program your own Time and Temperature settings
follow steps 1 through 6.
1. Set the current time.
a. Press the key
once. You will see a
flashing clock.
b. Use the or
clock is now set.
Preprogrammed Time and Temperature settings.
After the clock is set, you can use the preprogrammed
Time and Temperature settings, (see table 3) press the
key until End is displayed.
The preprogrammed Temperature settings can now be
used.
T8700B,C AN ELECTRONIC ROUND PROGRAMMABLE THERMOSTAT
PM
keys to set the current time.
Heating Cooling
Setpoint Setpoint
70°F (21°C) 78°F (25.5°C)
62°F (16.5°C) 82°F (28°C)
PM
keys to set the current time. The
2. Set your WAKE time.
a. Press the
once. You will see a
flashing WAKE time.
b. Use the
time. The WAKE time is now set.
M12506
3. Set your WAKE
temperature.
a. Press the
once. You will see a
flashing WAKE
temperature.
b. Use the
temperature. The WAKE temperature is now set.
4. Set your SLEEP time.
a. Press the
a
once. You will see a
flashing SLEEP time.
b. Use the
time. The SLEEP time is now set.
5. Set your SLEEP
temperature.
a. Press the
once. You will see a
flashing SLEEP
temperature.
b. Use the
temperature. The SLEEP temperature is now set.
6. Run program.
a. Press the
once. You have
completed your
program changes.
End is displayed for
five seconds indica-
ting the end of
programming. The
thermostat then
displays the current
time and room temperature.
NOTE: To exit the programming mode at any time, press the
key until End is displayed.
M12506
7
AM
key
or keys to set your desired WAKE
SET
AM
key
or keys to set your desired WAKE
key
PM
or keys to set your desired SLEEP
SET
PM
key
or keys to set your desired SLEEP
key
PM
68-0197—1
M12507
M12508
M12509
M12510
M12511
M12542