Setting The Clock - Honeywell CT1802 Owner's Manual

Setting The Clock

Lift thermostat flip-up cover and you'll find
the 24-hour program dial, slotted in 10-minute
increments. Adjust the clock to the current time
by moving the minute hand carefully in the
clockwise direction. Do not reverse the
minute hand.
When time is correctly set, the Time
Indicator Arrow (see Fig. 3) will point to the
correct time and corresponding daytime (light)
or nighttime (dark) band of the program dial.
EXAMPLE: For 11 PM, the time indicator arrow
will point directly to the dark band. For 11 AM,
the arrow will point to the light band on the
dial
Daylight Saving Time
When daylight saving time starts, move the
minute hand carefully in a clockwise
direction one hour. When daylight saving
time ends, move the minute hand carefully in
a clockwise
reverse the minute hand, or damage to the
clock mechanism may occur.
Fig. 3—Setting the clock.
12
direction 23 hours. Do not
69-0395—2
MINUTE
HAND
TIME
INDICATOR
ARROW
M2501