Troubleshooting - Casablanca M8516-01 Manual

Troubleshooting

Fan doesn't work
• Press a fan speed button (1-4).
• Check the circuit breaker to
ensure the power is turned on.
• Check the wall control battery.
• Make sure that you have paired
the wall control.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 9.
Excessive wobbling
• Tighten all of the blade screws
until they are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
Remote doesn't work
• Install a fresh battery in the wall
control.
• Make sure you have paired the
remote.
M8516-01 • 11/11/13 • © Casablanca Fan Company
Noisy Operation
• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan speeds are incorrect
• Turn power from the circuit
breaker off and back on, then
run the fan on speed "6" for at
least 90 seconds and check the
fan speeds again.
15
www.CasablancaFanCo.com
AUTHORIZED SERVICE
CENTERS
For the most updated list of
Casablanca Authorized Service
Centers, visit
www.CasablancaFanCo.com or
call toll free 1-888-227-2178.
1.888.227.2178