Table of Contents
Advertisement
Troubleshooting
Fan doesn't work
• Make sure power switch is on.
• Press a fan speed button (1-4).
• Check the wall control battery.
• Make sure that you have paired
the wall control.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10-11.
• Check the plug connection in
the switch housing.
Excessive wobbling
• Tighten all of the blade and
blade iron screws until they
are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to balance
the fan.
Remote doesn't work
• Install a fresh battery in the wall
control.
• Make sure you have paired the
remote.
M6010-01 • 10/30/14 • © Casablanca Fan Company
Noisy Operation
• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.CasablancaFanCo.com/FAQs
and click "How do I properly install
multiple remote-controlled fans?" for
information on how to correct this
issue.
21
www.CasablancaFanCo.com
Lights dim when turned on or
do not turn on at all.
• Make sure the wattage of the
light bulbs installed matches
the speciications on the light
sockets.
AUTHORIZED SERVICE
CENTERS
For the most updated list of
Casablanca Authorized Service
Centers, visit
www.CasablancaFanCo.com or
call toll free 1-888-227-2178.
1.888.227.2178
Advertisement
Table of Contents
