Table of Contents
Advertisement
EVENTS
How to edit or delete an event
1. Follow steps 1 to 3 and proceed as de-
scribed on page 21 to select the event you
want to edit or delete.
2. Press
twice.
3. Press
4. Select
or
and press
Selecting
you will get the possi-
bility of editing the date, the start and end time of
the event, the event text, the recurring frequency,
the tone volume and pattern, and the advance
notice for the event.
5. Confirm your corrections by pressing
Select
to delete the event.
If the event is recurring you will be asked to con-
firm that you really want to delete it.
How to see the status of your events
Select
under Events in the List menu.
The display will show you how many events you
have stored and indicate in percentage how much
capacity you have left. If the display shows
both lines, please check that your time and date
settings are up-dated.
Missed events
If an event occurs and you don't acknowledge it
by pressing
you will see this sym-
bol on the display
. The event recurs after
10 minutes. The phone will repeat this sequence
3 times. The digit after the symbol indicates the
number of missed events.
If an event occurs while your phone is turned off,
this symbol will be displayed
.
22
When you turn on your phone, you will see this
symbol on the display
.
How to see the list of missed events
1. Press
Use the arrow keys to scroll through the dates
of the missed events. After 2 seconds the receipt
times of missed events of the highlighted date
will be listed. Press
. After 2 seconds
the text of the first missed event of the date will be
displayed. If this event is not the one you want to
see use the arrow keys to scroll through the list of
missed events.
Press
when you have read the event. It will
then automatically be deleted from the Missed
event list, but you can always find it again under
in the List menu system.
How to see the list of missed events
at a later moment
Having accessed the list of missed events as
described above, the
symbol will
disappear from the display. However, the list will
always be available through the List menu system.
in
1. Press
to enter the List menu system.
2. Select
and press
Short Message Services (SMS)
Your phone can receive and send short text
messages via the network. On some networks you
have to subscribe to this facility.
There are two types of messages: point-to-point
messages which you can both receive and send,
and cell broadcast messages which you can only
receive.
Point-to-point messages
A new incoming message will be indicated by the
SMS indicator
on the standby display, as well
as by a message tone (if enabled – see page 32).
The display will also inform you how many new
messages there are for you.
How to read a new message
1. Press
to access the messages.
The display will show date and time of receipt
of each individual message.
2. Select the message you want to read by
means of
or
and confirm by
pressing
The phone number of the message sender will be
displayed in front of the message. You can now
scroll through the message by using the arrow
keys.
The message is automatically stored in the inbox
if you do not delete it.
MESSAGES
In addition to reading the message, you can either
– delete it
– send a reply
– forward it to another phone number
– edit it before sending
– extract a phone number, if any, from the
message to call or to store in your phone book
– call back to the sender
1. Press
2. Select the option you wish to enter
and confirm by pressing
3. The display will guide you through
the next steps.
When a message has been read it will be
indicated by a to the left of the date of receipt.
The SMS indicator
remains on the standby
display as long as there are unread messsages.
Delete messages
If the SMS indicator
is flashing, it indicates
that the message memory is full.
You can delete all messages stored either in the
Inbox or the Outbox at the same time.
1. Enter the sub menu
2. Confirm by pressing
23
Advertisement
Table of Contents
