Husqvarna Viking Scandinavia 200 User Manual page 32

Sewing
Step by Step Buttonhole
Your Scandinavia 200 has the Perfect
Balanced Buttonhole (PBB). The
machine sews buttonholes with both
columns stitched in the same direction
to get a perfect result.
• Select the bartack buttonhole or the
round end buttonhole and snap on
Buttonhole Foot C.
• When you begin sewing the
buttonhole, the machine will sew
the left column in reverse. The size
of the buttonhole is automatically
determined by placing the button in
the special buttonhole foot. Sew until
the left column of the buttonhole
reaches the red mark on your
buttonhole foot.
• Touch . Now the machine will
sew a straight stitch towards you
indicating the right column of your
buttonhole. Sew the straight until you
have reached the same length as the
fi rst column.
• Touch . Now the machine will
bartack and stitch the right side. Sew
until you have reached the same
length as the fi rst column.
• Touch and stitch the fi nal bartack.
Cutting Buttonholes
Cut the buttonhole open with the
seam ripper. Start from any side cutting
towards the center of the buttonhole,
then proceed from the other side - again
cutting towards the center. This way
you avoid damaging the bartacks.
30
12
80
13
80