Attach The Stand And Power Adapter Cord; Cable Equipment To The Ports - NETGEAR WN3500RP User Manual

Attach the Stand and Power Adapter Cord

The extender comes with a stand and power adapter cord. You can attach them as shown if
you do not want to plug the extender directly into an outlet.
1
Figure 6. Attach the stand and the power adapter cord.

To attach the stand and power adapter cord:
Slide the stand onto the extender as shown.
1
Turn the adapter so that you can see the side with the power adapter input.
2
Connect the power adapter cord to the extender.
3
You can now plug the other end of the power adapter cord into an electrical outlet.

Cable Equipment to the Ports

You can connect computers or other devices to the USB port and the Ethernet port on the
extender,
CAUTION:
Do not connect the extender to a router using an Ethernet port. If you do
so, the extender does not work because it is designed to use only a WiFi
connection to the router.
Universal Dual Band WiFi Extender – Desktop/Wallplug
2
Getting Started
3
11