Table of Contents
Advertisement
4. O
PERATING
Configuring the Starting Address
Each fixture requires a starting address from 1~512. A fixture requiring one or more channels for
control begins to read the data on the channel indicated by the starting address. For example, a
fixture that uses seven DMX channels and is addressed to start on DMX channel 100, will read data
from channels: 100, 101, 102, 103, 104, 105 and 106. Choose the starting addresses for each fixture
so that the channels used do not overlap. In addition, you should note the starting address selected
for future reference.
The COLORtube™ 3.0 EQ fixture uses six DMX channels. If this is your first time using DMX, we
recommend reading the "DMX Primer" section in the "Appendix".
Control Panel Functions
Access control panel functions using the four buttons located directly underneath the LCD Display on
the included wired remote.
Button
Used to select the
current operating mode,
<MODE>
as well as back out of
the current menu option
Used to select
<UP>
increasing advancement
in the value
Used to select
decreasing
<DOWN>
advancement in the
value
Used to select a value
<ENTER>
and store it to memory
select the operating mode, as well as the sub-features. For a detailed layout of the control panel
functions, please see the "menu map" section on the following page.
Page 12 of 22
I
NSTRUCTIONS
Function
The Control Panel shows the current state of the unit. It is used to
COLORtube™ 3.0 EQ User Manual Rev. 3
Advertisement
Table of Contents
