Zanussi ZWF 16581 W User Manual page 17

Operating sequence
Delayed start
The set delay (20 hours max) set by means of
the relevant button appears on the display for a
few seconds, then the duration of the
previously selected programme is displayed.
minute.
Incorrect option selection
Err is displayed for a few seconds and the
integrated red light of the button
flashing.
Alarm codes
paragraph "What to do if...").
Heating phase
started the heating phase of the water in the tub.
The delay time value
decreases by one unit
every hour and then,
when 1 hour remains,
the time decreases every
If an option which is not
compatible with the set
wash programme is
selected, the message
starts
8
In the event of
operating problems,
some alarm codes can
be displayed, for
example E20 (see
During the washing
cycle the display shows
a temperature icon
illuminated to indicate
that the appliance has
Start the machine by pressing the button
8
To start the selected programme, press the
button ; the corresponding green pilot light
8
stops flashing.
The light illuminates to indicate that the
9
appliance starts operating and the door is
locked.
The pilot light indicates if the door can be
9
opened:
light on: the door cannot be opened.
●
The appliance is operating or there is water
left in the tub. Attention! If the door is
locked do not try to open it!
light off: the door can be opened.
●
The washing programme is finished.
flashing light: the door is opening in a few
●
minutes.
To interrupt a programme which is running,
press the button : the corresponding green
8
pilot light starts to flash. To restart the
programme from the point at which it was
interrupted, press the button
If you have chosen a delayed start, the
machine will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the button
8
the message Err is displayed for a few
seconds.
Select the Delay Start by pressing the
buttons
10
Before you start the programme, if you wish to
delay the start, press repeatedly the buttons
and , to select the desired delay.
The selected delay time value (up to 20 hours)
will appear on the display for a few seconds,
then the duration of the programme will appear
again.
again.
8
flashes for 3 times and
17