Zanussi ZWF 16581 W User Manual page 16

Operating sequence
Light:
Select this option for slightly soiled items that
have been used or worn for a short time.
The washing intensity will be decreased and
the washing time will be reduced by few
minutes.
Select the Easy Iron option by pressing the
button
5
By selecting this button the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses. This
function can be used for cotton and synthetic.
Select the Extra Rinse option by pressing
the button
6
The machine performs some additional rinses.
This option is recommended for people who
are allergic to detergents, and in areas where
the water is very soft.
IMPORTANT!
If an option is chosen that is not allowed with
the selected programme, the red pilot light of
the button will flash 3 times.
8
9. Display
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example
2.05). The duration is calculated automatically
on the basis of the maximum recommended
load for each type of fabric.
16
After the programme
has started, the time
remaining is updated
every minute.
ATTENTION!
When selecting the «proportional»
programmes, the diplay shows the washing
duration of the maximum recommended load.
After the button has been pressed, an
8
arrows animation appears on the display
indicating that the appliance is calculating the
laundry amount and the real duration. During
this time, the washing duration shown
decreases.
When the calculating phase has finished, the
arrows animation disappears from the display
and the washing time is adjusted to the real
load.
Washing programme phase icons
By selecting the wash programme, the washing
programme phase icons corresponding to the
various phases making up the programme are
shown in the bottom of the display.
After the machine has started, only the running
icon stays on. When the programme has
finished, three flashing zero «
displayed.
» is
0.00