Advertisement
" "
INDEX { appleprinterindex }
::= { appleprinterTable 1 }
AppleprinterEntry ::=
SEQUENCE {
appleprinterindex INTEGER,
appleprintername DisplayString,
appleprinterenable DisplayString,
appleprintertype INTEGER,
appleprinterbidirectional DisplayString
}
appleprinterindex
SYNTAX
INTEGER (0..65535)
ACCESS
read-only
STATUS
mandatory
DESCRIPTION
"index of printer serviced "
::= { appleprinterEntry 1 }
value is fixed ti 1 on NIC
appleprintername
SYNTAX
DisplayString (SIZE(0..32))
ACCESS
read-write
STATUS
mandatory
DESCRIPTION
"Name assigned to printer for Apple use."
::= { appleprinterEntry 2 }
Default value reported on NIC is no value, indicating that there is no value in NVRAM
However, unit will assunme default value of
appleprinterenable
SYNTAX
DisplayString (SIZE(0..8))
ACCESS
read-write
STATUS
mandatory
DESCRIPTION
"(E)nabled or (D)isabled."
::= { appleprinterEntry 3 }
Not Applicable to
NIC, since enable/disbale is on basis of AppleTalk protocol. Response is
N/A
appleprintertype
SYNTAX INTEGER (0..65535)
ACCESS
read-write
STATUS
mandatory
DESCRIPTION
"Unused"
::= { appleprinterEntry 4 }
NIC response is '0'
appleprinterbidirectional
SYNTAX
DisplayString (SIZE(0..3))
ACCESS
read-only
STATUS
mandatory
DESCRIPTION
"This variable specifies the bidirectional capabilities of of the Appletalk printer. YES if
printer is bidirectional, NO if not."
OBJECT-TYPE
OBJECT-TYPE
'NIC Multiprotocol'
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
Advertisement
