Xerox DocuPrint 4512 User Manual page 138

STATUS mandatory
DESCRIPTION
"This variable specifies which protocol to use for flash download. The default is NetWare.
"::= { dpidiag 4 } the only download presently implemented is NetWare, regardless of value
set. Variable reads back as 65535
downloadpath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies a pathname to retrieve a download file. This variable is currently
not used."
::= { dpidiag 5 }
NIC variable reads back as N/A.
Statusreporttype OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable contains the status report on power up options. The state can be no report,
print ascii report or print postscript report.
0 - no ASCII report
1 - print ASCII report
2 - no postscript report
3 - print postscript report
65535 - unsupported"
::= { dpidiag 6 }
NIC defaults to enum 3
serialnumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies the Serial Number of the unit; form is six decimal digits."
::= { dpidiag 7 }
enetAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Address, six 8-bit binary values.Derived ethernet address is given even on token
ring boards"
::= { dpidiag 8 }
tokenAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Token Ring Address,six 8-bit binary values. Derived Token Ring address is given even on
ethernet boards"
::= { dpidiag 9 }
totalports OBJECT-TYPE