Page 2
.FUNCTION INTRODUCTION 4.Push the power switch, the power-indicating light is lighted. 5.when the microphone is working the "SIGNAL"light ofthe receiver is lighted. Our special wireless microphone system has these characteristics as the The receiver output voice, volume of the receiver can be controlled by following.
Page 3
1.Power switch 2.Power indicator TRANSMITTER Maximum Deviation Range: 35 KHz(Max) 3.Volume knobs 4.Antenna Frequency Stability: SYSTEM COMPOSITION ±O.005% 5.DC Input socket 6.Balance audio socket of channel Aand B 1.Receiver R F Output Power: <30mW 7.Mixed output socket B.ReceiverSignal indicator 2.Microphone R F Rejection: >40dB 3.Audio cable...