Download Print this page
Pyle PDWM2150 User Manual

Pyle PDWM2150 User Manual

Professional dual table top vhf wireless microphone system

Advertisement

Quick Links

Professional Dual Table Top VHF
Wireless Microphone System
Specifications
Professional VHF 2 Channel Wireless System
Dual Table Top Microphones Included
Dual Telescoping Receiver Antennas
Dual Volume Controls
On/Off Broadcasting Switch
1/4" Individual line outputs & Mixed 1/4" Outputs
Carrier Frequency: 174MHz-216MHz
Dynamic Range: 92dB
Total Harmonic Distortion: 0.5%
Frequency Response: 50Hz-16KHz
Operation Range: 50-180 Meters
Signal to Noise Ratio: 90dB
Receiver Power Supply: AC 110V/240V
Microphone Power Source: 9 Volt (Battery Not Included)
Receiver Dimensions: 1.7 X 16.5" X 7.3"
Microphone Dimensions: 12.7" LX 4.9" W X 5.9" D
Function
Front Panel
(1 )Power switch
(3)Volume
(2) Power indicator
(4)Receiving indicator
PDWM
2150 User Manual
Rear Panel
(1)ATTN.A
(2)Audio Mix out
@ @
(3)ATTN.B
(4)110V/60Hz Power input
Table Meeting Microphone Function
This circle light is working, indicating the battery
working when the transmitter is switched on.
Power supply
Power consumption
Cartridge
Polarity
DC9V
<35mA
Condenser noise proof
Uni-direction
1.Cartridge
2.Working indicator
3.Switch
4.Power and low voltage two color indicator

Advertisement

loading

Summary of Contents for Pyle PDWM2150

  • Page 1 www.pyleaudio.com PDWM 2150 User Manual Rear Panel Professional Dual Table Top VHF Wireless Microphone System Specifications • Professional VHF 2 Channel Wireless System • Dual Table Top Microphones Included • Dual Telescoping Receiver Antennas • Dual Volume Controls (1)ATTN.A (3)ATTN.B •...
  • Page 2 Installation ofreciever Operation • Keep the machine 1 m above the ground 1.Please take the following working flow diagram for • Keep the machine away 1 m against the wall. reference on using this machine-connect the mix out • Pull the antenna up rightness fully of receiver with mic input on the amplifier.