Maintenance; Maintenance.schedule - Husqvarna RZ3016 Operator's Manual

Maintenance Schedule
The following is a list of maintenance procedures that
must be performed on the machine. For those points
not described in this manual, visit an authorized
service workshop. An annual service carried out by

Maintenance

Check the parking brake
Check the engine's oil level (every refueling)
Check the safety system
Check for fuel and oil leakages
Check/clean the engine's cooling air intake
Check the mower deck
Check for loose hardware (screws, nuts)
Clean under the mower deck
Start the engine and blades, listen for unusual sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys
Check the tire pressures
Check battery
Sharpen/replace mower blades
Clean the engine's cooling air intake
Clean the air cleaner's pre-filter
Clean the air cleaner's filter cartridge
Check/adjust the parking brake
First change after 5-8 hours. When operating with a heavy load or at high
1)
ambient temperatures, replace every 50 hours.
In dusty conditions, cleaning and replacement are required more often.
2)
For daily use, the machine should be lubricated twice weekly.
3)
Performed by authorized service workshop.
4)
●
= Described in this manual
♦
= Not described in this manual
■
= See engine manufacturers' Owners Manual
MAINTENANCE
2)
(foam)
2)
(paper filter)
2)
an authorized service workshop is recommended to
maintain your machine in the best possible condition
and to ensure safe operation.
Read Maintenance in the Safety section.
Daily Weekly
Before After
●
■
●
♦
■
●
●
●
♦
♦
♦
♦
At Maintenance interval in
least hours
once
each
year
25 50 100
●
●
●
■ ■
■ ■
■ ■
♦ ♦
300
33