Husqvarna RZ3016 Operator's Manual page 26

8. Open the fuel valve.
9. Press in and turn the ignition key to the start
position.
10. When the engine starts, immediately release the
ignition key back to the run position.
11. Slowly push the choke control down when the
engine has started.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
26
OPERATION
Open the fuel valve
Turn to START position
Release ignition to the RUN position
8050-010
8050-135
8050-136